| |
|
|
 |
 |
 |
|
|
Modular system with separate DSP MixRack and control Surface
Mix and match any combination of MixRack and Surface
Link systems for FOH/Monitors using digital mic split
iLive Editor software for online/offline control using PC or MAC
Can control MixRack without a Surface using Editor
Compatible firmware and file format across whole range
Network, wireless laptop and remote control
Digital snake for local audio at the surface and mic splitting
Processing 64 channel x 32 mix with 8FX
16 DCA groups – DCA or Mute group mode
7x surface versions – 12 to 44 faders, local audio built in
5 MixRack versions – modular or fixed format, 0 to 64 mics
Assignable DSP architecture and Surface strip layout
|
64 input channels + 8 stereo FX returns = 72 sources to mix
Mono/stereo input channel configuration
8x built-in stereo FX
32x mixes configurable as:
Mono/stereo groups,
Mono/stereo internal FX
Mono/stereo auxes
Main mix – M, LR, LCR, LCR+, LR+Sub, LCR+Sub, LR+M, LCR+M
Mono/stereo matrix
Inserts assignable on every input and mix
Patchable channel direct outs and bus in/outs
8x Channel Gangs – up to 8 sources each, selectable parameters
Switchable mono/stereo PFL or AFL
Talkback assignable to any combination of mix buses
Internal signal generator:
Swept frequency sine wave, swept bandpass, white, pink noise
Copy/Paste/Reset editing of channel and mix parameters
|
iLive-R72 (12 faders, 6 layers = 72 assignable strips)
iLive-80/T80 (20 faders, 4 layers = 80 assignable strips)
iLive-112/T112 (28 faders, 4 layers = 112 assignable strips)
iLive-144 (36 faders, 4 layers = 144 assignable strips)
iLive-176 (44 faders, 4 layers = 176 assignable strips)
LCD virtual ‘write-on’ strip for user assignable name and colour
Control strips – fader, pan, MIX, MUTE, PAFL, SEL, LCD, meter
TouchScreen for setup and graphic view of processing
8x User assignable SoftKeys
Analogue style one knob per function channel processing
Illuminated rotary controls with LED position display
Quick all channel mix assign and pre/post selection
Freeze in Layers strip function
Alt View channel LCD display / encoder function
Surface lock function |
64 channel bi-directional audio, 48kHz sampling rate
iDR10, iDR0, iLive RAB2 module – 2x slots
iDR-16, iDR-32, iDR-48 – 1x slot
Port A = Surface to MixRack link (digital snake)
Port B = Digital mic split, system expansion
Port A options – ACE™, EtherSound, MADI
MixRack Port B options – ACE™, EtherSound, MADI, MMO
Surface Port B options – MMO
ACE™ - 64 channel bi-directional, single CAT5 audio + control
EtherSound – 64 channel bi-directional, low latency network, CAT5
MADI – 64 channel bi-directional, 48kHz, 75 ohm coax cable
MMO (Mini Multi-Out) card option:
24ch ADAT, 16ch Aviom™, 2x 8ch iDR (Hearbus™ compatible)
|
Digitally controlled preamp
ADC 24-bit multi-bit delta sigma
108dB dynamic range
Balanced female XLR, pin 2 hot
Impedance 2k ohm, >10k ohm (pad in)
Gain +10 to +65dB, -15 to +40dB (pad in)
Resolution 1dB steps
Pad 25dB
Maximum input +30dBu (pad in)
Noise EIN (150 ohm) -127dB
Module LEDs (iDR10, iLive only) 48V, CHK (PAFL) |
Network devices – MixRack, Surface, TouchScreen
TCP/IP Ethernet – Assignable IP addresses
Default IP addresses – Sub mask 255.255.255.0
IP 192.168.1.1 (MixRack) .2 (Surface) .3 (TouchScreen)
Built-in 3-port Ethernet switch
Maximum CAT5 cable length 100m / 330 feet
Can work with standard Ethernet optical fibre / dual redundant systems
MIDI (tunnel between MixRack and Surface)
PL-Anet for A&H PL-Series controllers |
DAC 24-bit multi-bit delta sigma
114dB dynamic range
Balanced male XLR, pin 2 hot
Power up/down relay protected
Impedance < 75 ohm
Nominal output +4dBu
Maximum output +22dBu
Residual output noise -94dBu
Module LEDs (iDR10, iLive only) MUTE, CHK (PAFL) |
48kHz sampling rate
24-bit, 48-bit data in EQ processing
System latency < 2ms rack in to out, < 2.25ms surface in to out |
DR10, iLive – Module, select 1 of 3 formats:
AES3, SPDIF, Optical Toslink
Sample rate conversion selectable on each pair
Module LEDs (iDR10, iLive only) SEL, CHK (PAFL)
T, R Surfaces - SPDIF |
Frequency response 20-20kHz +0/-0.5dB
THD+N < 0.004% (1kHz, mic +35dB to line out)
Channel separation > 95dB |
iDR10, iLive – Module, 3 formats simultaneously available:
AES3, SPDIF, Optical Toslink
DARS (digital audio reference signal) master clock
Module LEDs (iDR10, iLive only) MUTE, CHK (PAFL)
T, R Surfaces – fixed SPDIF |
Input virtual patchbay
Output virtual patchbay
Remote Port A and Port B routing
Insert patching
External input to each mix
Patchable Talkback mic input
Aux pre/post, send source and direct out options
|
16 LED main channel/mix meters
Extensive metering on processing strip
Peak indication across fader layers
Dedicated PAFL meters
4x User assignable meter screens |
2x iDR10 modules (Second for redundant backup)
1x surface internal psu module
Optional iPS10 2U rack psu for redundant backup
MixRack power requirement 100-240V.AC, 47-63Hz, 320W max
Surface power requirement 100-240V.AC, 47-63Hz, 320W max |
2x headphone amps (MixRack and Surface)
2x sockets on Surface - standard and 3.5mm mini jack
Surface local stereo monitor balanced line outputs
Surface stereo PAFL balanced XLR audio inputs (iLive only)
Select and listen to any point in the signal path
Input and mix PFL or AFL in-place selection
PFL overrides AFL
Cancel all PAFL function
Auto cancel or additive PAFL mode
PFL trim up to 24dB gain
Dual engineer’s monitor mode (wedge/in-ear systems)
PAFL indication at mix rack - CHK indicators (iDR10, iLive only)
Solo-in-Place with SIP safes |
iDR10 482mm (19”) x 400mm (15.75”) 9U x 350mm (13.8”)
F/case iDR10 643mm (25.3”) x 730mm (28.75”) x 669mm (26.34”)
iLive-80 753mm (29.6”) x 353mm (13.9”) x 707mm (27.7”)
iLive-112 1006mm (39.6”) x 353mm (13.9”) x 707mm (27.7”)
iLive-144 1206mm (47.5”) x 353mm (13.9”) x 707mm (27.7”)
iLive-176 1406mm (55.35”) x 353mm (13.9”) x 707mm (27.7”)
F/case iLive-112 1107mm (43.6”) x 1017mm (40”) x 452mm (17.8”)
F/case iLive-144 1307mm (51.46”) x 1017mm (40”) x 452mm (17.8”)
F/case iLive-176 1507mm (59.33”) x 1017mm (40”) x 452mm (17.8”)
iPS10 psu 482mm (19”) x 88mm (3.46”) 2U x 310mm (12.2”) |
Preamp – gain, trim, pad, polarity, 48V
HPF – 12dB/octave swept 20-400Hz
Noise gate – threshold, depth, hold, attack, release, sidechain
PEQ – 4 band fully parametric, shelf / bell / filter on HF and LF
Compressor – thresh, ratio, attack, rel, auto, knee, gain, sidechain
Limiter/de-esser – threshold, de-ess freq, sidechain with listen
Delay – up to 170ms |
iDR10 26kg (57 lb), 68kg (150 lb) in flightcase
iLive-80 39kg (86 lb) no flightcase
iLive-112 43kg (95 lb), 98kg (216 lb) in flightcase
iLive-144 48kg (106 lb), 114kg (251 lb) in flightcase
iLive-176 54kg (119 lb), 124kg (273 lb) in flightcase
iPS10 psu 6kG (2.7 lb) |
PEQ – 4 band fully parametric, shelf / bell / filter on HF and LF
GEQ – 1/3 octave, 25 band, TouchScreen or fader control
GEQ fader view - all EQ bands, reset band to 0dB
Compressor – thresh, ratio, attack, rel, auto, knee, gain, sidechain
Limiter – threshold, sidechain with key filter listen
Delay – up to 340ms |
8x internal RackExtra FX
Virtual rack with front and rear panel views
Includes emulations of classic industry devices
Choose long (part of 64 channel) or short (extra) returns
DFX (dynamic FX shaper) for gating and ducking shaping
Short returns include 4-band PEQ
|
Libraries – Gate, PEQ, GEQ, Comp, Limiter, De-esser, FX, full channel, full mix, PL controller setup
Scenes – selectable parameters, safes, can be named
Shows – Configuration, current settings, all scenes, libraries
USB memory key library and show archive
Scene transfer from within USB Show
User Profiles – assign permissions for up to 8x users
User assignable channel/Mix/DCA names - 5 characters
User assignable channel/Mix/DCA colours - 6 colours + off |
* Not all the listed functions are available at first product ship. Some
functions will be introduced in planned future software releases.
** We reserve the right to make changes in the interest of further product
development. |
|
|
 |
 |
 |
|
|
